HobbyKing
TURNIGY DLUX PROGRAMMING BOX W/DATA LOGGING FEATURE
| Data logging display parameters | Max Temperature |
| Motor Rotation | Forward/Reverse |
| Acceleration (soft start) | Low, Medium, High |
| Switch Frequency | 8, 16kHz |
| Governor Mode | (fixed RPM mode) |
| Restore Default Settings | No, Yes |
| Data Logging Display Feature | Yes |
Programming Options:, Battery Type:, NICD/NIMH, Lipo Auto Detect, Cut-Off Voltage:, 2.5~3.5v in 0.1v increments, Timing:, Automatic, Medium, High, LV Cut off Type:, Ignore, Reduce Power, Stop Motor,
Turnigy dlux Programming Box. *Now featuring data logging display when ...5 Reviews
HobbyKing
HOBBYKING R2 SPEEDOMETER FOR RC CAR
| Working temperature | -20°C to 50°C |
| Dimensions | 33x11x69mm |
Features:, -Measures and records present car speed, max car speed, and average car speed, Weight:, 21g (without connection wire), Input voltage range:, 3~24V (7.4V recommended),
The Hobbyking R2 Speedometer is a car speed recorder designed ...3 Reviews
HobbyKing
CORONA R8FA 2.4GHZ FASST COMPATIBLE RECIVER
| Operating Voltage | 4.0 ~10V |
| Sensitivity | ~ -96dBm |
| Size | 55x33x14mm |
| Weight | 16.8g |
| Antenna length | 136mm |
Specs:, Operating Current:, 70mA @ FASST 7ch mode normal and 110 mA max,, Latency:, 7mS for high speed PPM (HS), 14mS for low speed PPM (LS) @ FASST multi-channel mode,, Fail Safe:, Yes (See manual in files tab),
Compatible with Futuba Fasst transmitters the Corona R8FA offers an ...5 Reviews
HobbyKing
TURNIGY D2836/8 1100KV BRUSHLESS OUTRUNNER MOTOR
| Battery | 2~4 Cell /7.4~14.8V |
| RPM | 1100kv |
| Max current | 18A |
| Diameter of shaft | 4mm |
| Max thrust | 1130g |
No load current:1A, : 336W, : 0.107 ohm, Weight:, 70g (including connectors), : 28x36m, Prop size:, 7.4V/11x7 14.85V/7x3,
Turnigy D2836/8 1100KV Brushless Outrunner Motor Spec. Max power Internal ...5 Reviews
HobbyKing
TRACKSTAR 1/18TH SCALE 7.5T BRUSHLESS POWER SYSTEM (6100KV)
| Cont. Current | 18A |
| Burst Current | 25A |
| Car Size | 1/18th |
| L-BEC | 5V / 1A Output |
| Size | 30 x 26.1 x 13.8mm |
| Motor Plugs | 3.5mm Bullet type |
| Battery Plug | Required |
| On/Off Switch | Yes |
| Reverse | Yes |
| Turns | 7.5T |
| KV value | 6100KV |
| Diameter | 21.5mm |
| Motor length | 37mm |
| Extend shaft diameter | 2mm |
| Length of extend shaft | 11±0.5mm |
| Weight | 60g |
| 7.2V | 2.7A |
| Max current | 40A |
| Resistance (Ω) | 0.021Ω |
| Battery range | 2~3s 7.4v~11.1v |
| Operation Temperature | 80° |
| Suitable car scale | 1/18 |
| Suitable ESC | 25A |
| Thickness of lamination | 0.2X20mm |
ESC Specification:, Battery:, 2-3 Cell Lipo / 4-9 Cell Ni-XX, Motor Type:, Sensorless Brushless, Weight:, 26g (Including wires), Motor Specifications:, Poles:4, NOTE:, We suggest reducing your gearing if running this motor on 3S.,
TrackStar performance now in comes in easy to select Combo ...5 Reviews
HobbyKing
TRACKSTAR 1/18TH SCALE 12T BRUSHLESS POWER SYSTEM (5050KV)
| Cont. Current | 18A |
| Burst Current | 25A |
| Car Size | 1/18th |
| L-BEC | 5V / 1A Output |
| Size | 30 x 26.1 x 13.8mm |
| Motor Plugs | 3.5mm Bullet type |
| Battery Plug | Required |
| On/Off Switch | Yes |
| Reverse | Yes |
| Turns | 12T |
| KV value | 5050KV |
| Diameter | 21.5mm |
| Motor length | 37mm |
| Extend shaft diameter | 2mm |
| Length of extend shaft | 11±0.5mm |
| Weight | 60g |
| No loading @ 7.2V | 2.2A |
| Max current | 34A |
| Resistance (Ω) | 0.027Ω |
| Battery range | 2~3s 7.4v~11.1v |
| Operation Temperature | 80° |
| Suitable car scale | 1/18 |
| Suitable ESC | 25A |
| Thickness of lamination | 0.2X20mm |
ESC Specification:, Battery:, 2-3 Cell Lipo / 4-9 Cell Ni-XX, Motor Type:, Sensorless Brushless, Weight:, 26g (Including wires), Motor Specifications:, Poles:4,
TrackStar performance now in comes in easy to select Combo ...5 Reviews
HobbyKing
TRACKSTAR 1/18TH SCALE 14T BRUSHLESS POWER SYSTEM (4300KV)
| Cont. Current | 18A |
| Burst Current | 25A |
| Car Size | 1/18th |
| L-BEC | 5V / 1A Output |
| Size | 30 x 26.1 x 13.8mm |
| Motor Plugs | 3.5mm Bullet type |
| Battery Plug | Required |
| On/Off Switch | Yes |
| Reverse | Yes |
| Turns | 14T |
| KV value | 4300KV |
| Diameter | 21.5mm |
| Motor length | 37mm |
| Extend shaft diameter | 2mm |
| Length of extend shaft | 11±0.5mm |
| Weight | 60g |
| No loading @ 7.2V | 1.8A |
| Max current | 30A |
| Resistance (Ω) | 0.037Ω |
| Battery range | 2~3s 7.4v~11.1v |
| Operation Temperature | 80° |
| Suitable car scale | 1/18 |
| Suitable ESC | 25A |
| Thickness of lamination | 0.2X20mm |
ESC Specification:, Battery:, 2-3 Cell Lipo / 4-9 Cell Ni-XX, Motor Type:, Sensorless Brushless, Weight:, 26g (Including wires), Motor Specifications:, Poles:4,
TrackStar performance now in comes in easy to select Combo ...5 Reviews
HobbyKing
TURNIGY DLUX 30A SBEC BRUSHLESS SPEED CONTROLLER W/DATA LOGGING (2S~4S)
| Data logging display parameters | Max Temperature |
| Max Cont. Current | 30A |
| Max Burst Current | 40A |
| BEC Voltage | 5.5v |
| LiPo | 2~4S |
| Weight | 23grams |
| Max RPM (2-pole) | 200,000rpm |
| Size | 51 x 27 x 11mm |
| Battery Plug | Nil |
| Battery Type | 2S~4S |
| Active RPM Control | On/Off (Governor Mode) |
| Brake | off |
| Battery | LiPo Auto Detect |
| Timing | Auto |
| Frequency | 8KHz |
| Note | Programming box now available, check the related items below. |
Max BEC Current:2A, Motor Plug:, Female 3.5mm bullet Connector, Low Voltage:, 3.2v (power down motor),
Turnigy® dlux SBEC ESCs have set a new bench mark ...5 Reviews
HobbyKing
TURNIGY DLUX 20A SBEC BRUSHLESS SPEED CONTROLLER W/DATA LOGGING (2S~4S)
| Data logging display parameters | Max Temperature |
| Max Cont. Current | 20A |
| Max Burst Current | 30A |
| BEC Voltage | 5.5v |
| LiPo | 2~4S |
| NiMH | 5~12cells |
| Weight | 22grams |
| Max RPM (2-pole) | 200,000rpm |
| Size | 51 x 27 x 11mm |
| Battery Plug | Nil |
| Battery Type | 2S~4S |
| Active RPM Control | On/Off (Governor Mode) |
| Brake | off |
| Battery | LiPo Auto Detect |
| Timing | Auto |
| Frequency | 8KHz |
| Note | Programming box now available, check the related items below. |
Max BEC Current:2A, Motor Plug:, Female 3.5mm bullet Connector, Low Voltage:, 3.2v (power down motor),
Turnigy® dlux SBEC ESCs have set a new bench mark ...5 Reviews
HobbyKing
TURNIGY 3-IN-1 HELI 5A UBEC & LOW VOLTAGE ALARM (3~6S)
| UBEC Output | 5V/6V 5A (7.5A max) |
| Dimensions | 60x26x13mm |
| Weight | 28g |
Specs:, Input Voltage:, 3S/4S/6S lipoly (11.1V/14.8V/22.2V), Low Voltage Alarm:, 3.3V or 3.5V per cell,
The Turnigy 3-in-1 Heli UBEC is a great choice for ...5 Reviews
HobbyKing
TURNIGY FATBOY 8 1300W WORKSTATION CHARGER
| Pack capacity | 20mAh to 360000mAh |
| Input voltage | 10-32VDC, reverse polarity protected |
| Input current | 1A to 60A, software limited |
| Output battery charge current | Adjustable range 10mA to 40A, limited by 60A input current |
| Output battery discharge current | Internal discharge 10mA to 10A, 100W max |
| Continuous max output power | 600W @ +12VDC input, 1300W @ +26.35VDC |
| Cell balancing | Resolution 78uV (16 bit) for 1s-8s Li or A123 (LiFePO4) balanced charging |
| Cell balancing current | 1A per cell |
| Current calibration | Charge current is factory calibrated on a 4A standard; calibration is to +/- 1mA |
| Data integrity | Checksum, CRC checking |
| Cooling fans | Twin, 13 CFM, 50mm diameter |
| Heat sink | Internal 200W aluminum, thin finned |
| Output battery connector | JST PA series, 9 position |
| LCD | 2 line, 16 character, light grey/blue backlit |
| Size | 148 x 167 x 91mm |
Specs:, Battery type:, Lithium Polymer, Lithium Ion, Lithium Manganese, Voltage calibration:, Cell voltage measurements are factory calibrated to a, Note: Balance board required, sold separately. See related items below. Optional PC interface cable also sold seperatly.,
POWER Introducing a charger like no other...the Turnigy Fatboy 8 ...5 Reviews
HobbyKing
TURNIGY ROTORSTAR DUAL POWER 15A VOLTAGE REGULATOR
| Input Voltage | 2S Lipoly (6~8.4V) |
| Power Connector | JST |
| Dimensions | 64 x 40 x 17mm |
| Weight | 59g |
Features:, • Stable, reliable power supply for your servos/receiver, Specs:, Dual Output:, 1. RX power 5.2V 5A (10A max), Low Voltage Alarm:, LiFe (6.5V), LiPo (7.3V), Switch Type:, Fail Safe (fail safe on) pin-flag contactless type,
The RotorStar Dual Power 15A Voltage Regulator is a twin ...5 Reviews
HobbyKing
TURNIGY 10XC 10S 400W 10A DUAL CHANNEL BALANCE CHARGER
| Voltage resolution | 78uV (16 bit) |
| Voltage tolerance | +/- 6mV |
| Charge current | +/- 1% |
| Capacity added to pack | +/- 1% |
| Percent capacity (“Fuel”) | +/- 10% |
| Input Voltage | 10~32VDC |
| Max Charge | 400W / Max Discharge |
| Charge Current Range | .1~10A |
| Discharge current range | .1~5.0A |
| Ni-MH/NiCd cells | 1~28 |
| Li-XX cells | 1~10 |
| Dimensions | 174 x 93 x 43mm |
| Weight | 613g |
Features:, Capable of up to 10A charge rates and 400W total charging power, Measurement accuracy:, Circuit power:, Note:, Balancing boards are sold separately. Please see related products below. Two adapter boards for your brand of battery will be required for 10s charging.,
The ALL NEW Turnigy 10XC is designed to provide a ...5 Reviews
HobbyKing
NTM PROP DRIVE 13-12 2600KV / 42W
| Max current (Burst) | 3.9A |
| Max Power | 42W @ 11.1v (3S) |
| Shaft | 1.5mm |
| ESC | 5~8A |
| Cell count | 2s~3s Lipoly |
Specs:, Model:, NTM Prop Drive Series 13-12 2600kv, Kv:2600rpm/v, : 3.0A, Weight:5g, Mount type:, Tri-hole firewall mount (15mm width between mount holes), Connection:, Loose wire (for direct soldering), Prop Test Data:, 3.75x3 - 7.4V / 13W / 1.8A / 62g thrust,
NTM Prop Drive motors are rock-solid performance outrunners with tight ...5 Reviews
HobbyKing
CORONA R14FA 2.4GHZ FASST COMPATIBLE RECIVER
| Operating Voltage | 4.0 ~10V |
| Sensitivity | ~ -96dBm |
| Fail Safe | Yes |
| Size | 53x37x16mm |
| Weight | 22g |
| Antenna length | 136mm |
Specs:, Operating Current:, 70mA @ FASST 7ch mode normal and 110 mA max,, Latency:, 7mS for high speed PPM (HS), 14mS for low speed PPM (LS) @ FASST multi-channel mode,, Compatibility:, FUTABA FASST 2.4GHz transmitters,
Compatible with Futuba Fasst transmitters the Corona R14FA offers an ...5 Reviews